Menu
Your Cart

ESP-12F ESP8266 Wifi Wireless IoT Board Module

ESP-12F ESP8266 Wifi Wireless IoT Board Module
ESP-12F ESP8266 Wifi Wireless IoT Board Module
ESP-12F ESP8266 Wifi Wireless IoT Board Module
ESP-12F ESP8266 Wifi Wireless IoT Board Module
ESP-12F ESP8266 Wifi Wireless IoT Board Module
This Product is available in Ahmedabad - India Warehouse .
Approx Delivery Time is 2-5 Days.
₹97
10 or more ₹95
50 or more ₹94

(Excluding 18% GST)

The Latest ESP-12F ESP8266 Wifi Module AP & Station Remote Serial Wireless IoT Board is an integrated chip designed for the needs of a new connected world. ESP8266 is a low-cost Wi-Fi chip with a full TCP/IP stack and MCU capability. It can handle all the necessary overhead for communicating with your network, such as TCP/IP stack and communicating with your 802.11 networks.

ESP8266 Serial Wifi Wireless Transceiver Module has a powerful enough on-board processing and storage capability that allows it to be integrated with the sensors and other application-specific devices through its GPIOs with minimal development up-front and minimal loading during runtime.ESP8266 Serial Wifi Wireless Transceiver Module is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers.

ESP8266 Serial Wifi Wireless Transceiver Module is a self-contained SOC with an integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 supports APSD for VoIP applications and Bluetooth co-existence interfaces, it contains a self-calibrated RF allowing it to work under all operating conditions and requires no external RF parts. Its high degree of on-chip integration allows for minimal external circuitry, including the front-end module, which is designed to occupy minimal PCB area.

It improved on the Following:

  • The four laminates plate process
  • Anti-jamming ability
  • Stronger WiFi signal output
  • Enhanced impedance matching
  • Peripheral circuit
  • PCB antenna redesigned after professional laboratory testing

Corresponding Interface :

  • Integrated WEP, TKIP, AES, and WAPI engines
  • Integrated RF switch, balun, 24dBm PA, DCXO, and PMU
  • SDIO 2.0, SPI, UART
  • On-chip low-dropout linear regulators for all internal supplies
  • Quality of Service management
  • I2S interface for high fidelity audio applications
  • Integrated RISC processor, on-chip memory, and external memory interfaces
  • Integrated MAC/baseband processors
  • Proprietary spurious-free clock generation architecture
  • 32-pin QFN package

Specifications & Features:

  • Wireless criteria: 802.11 b / g / n
  • Wireless Network Mode: station / softAP / SoftAP + station
  • Serial port baud rate: 115200 (default), can be modified to other values by AT command
  • Serial communication format: 8N1
  • WIFI @ 2.4 GHz, support for WPA / WPA2 security mode
  • Wi-Fi Direct (P2P), soft-AP
  • SDIO 1.1/2.0, SPI, UART
  • STBC, 1×1 MIMO, 2×1 MIMO
  • Compatible with ESP-12(ESP-202)
  • It is very easy to develop projects with AT commands
  • Surface Mount Package with 2mm Pitch Pads
  • Multiple GPIO’s for all your sensor needs
  • Integrated TCP/IP protocol stack
  • Integrated TR switch, balun, LNA, power amplifier, and matching network
  • Integrated PLL, regulators, DCXO, and power management units +19.5dBm output power
  • Integrated low power 32-bit CPU could be used as an application processor
  • A-MPDU & A-MSDU aggregation & 0.4ms guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Both SMD and Inline packages are available, and the pin pitch is 2.0mm.
  • Communication interface voltage: 3.3V
  • Working current: 240mA(MAX)
  • Power down leakage current of <10uA

Package Includes :

1 x ESP-12F ESP8266 Wifi Module

Technical
Antenna Type

Built-in PCB antenna

Communication interface voltage

3.3V

Serial communication format

8N1

Serial port baud rate

115200 (default), can be modified

Wireless Network Mode

station / softAP / SoftAP + station

Wireless criteria

802.11 b / g / n

Length

1.6 cm

Height

0.4 cm

Width

2.4 cm

Write a review

Note: HTML is not translated!
Bad Good
Captcha

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.

Name
Email
Phone
Comments