DHT11 Temperature And Humidity Sensor Module with LED

• DHT11 sensor with PCB and LED indicator along with cable; 3 to 5V power and I/O, 4 pins with 0.1″ spacing
• Good for 20-80% humidity readings with 5% accuracy
• 2.5mA max current use during conversion (while requesting data)
• Good for 0-50°C temperature readings ±2°C accuracy.
• The board has a pre-built 4.7K or 10K resistor, which you will need to use as a pull-up from the data pin to VCC.

Package Includes:

1 x DHT11 Temperature And Humidity Sensor Module.