WH148 20K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 20K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
WH148 50K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 50K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
WH148 5K Ohm 3Pin 15mm Shaft Potentiometer is used for adjusting various parameters like voltage, current, etc in an electronic circuit. This is a three-terminal variable resistor that is used to vary or change the resistance.
It is a 5K ohm 3pin 15mm shaft potentiometer.
Package Includes:
..
This is White Noise Signal Generator DIY Kit, with 2 channel signal output. It includes the common electronic components such as a resistor, capacitor, and potentiometer with DIP soldering mounting to practice your soldering skills
Features:
Easy to assemble
Two-way signal output
Perf..
This is a WIFI 2.4G 4dbi PCB Board Antenna.
Features:
Frequency 2400 ~ 2500 MHz
S.W.R. = 1.0 Kg
Environmental:
Operation Temperature - 40 °C ~ + 65 °C
Storage Temperature - 40 °C ~ + 80 °C
Application:
IEEE 802.11 b/g/n WLAN System
Wireless Communication System
Wi-Fi ..
Wireless 433MHz Garage Door Remote Control 4 buttons for 4 different garage doors, electronic rolling doors, or RF 433MHz retractable doors.
It is widely used in remote control switches, receiving modules, motorcycles, automobile anti-theft products, family anti-theft products, electric doors, ro..
This is WS2812 RGB LED Controller Adapter Module for ESP8266 ESP-01. You can make a colorful display project for Arduino IDE.
Features:
Interface: 3Pin connector.
Support 3.7V lithium battery.
It is based on ESP-01/ ESP-01S.
It supports Arduino IDE programming.
Package includes:
..
This is WXD3-13-2W 10K ohm Precision Potentiometer, widely used to adjust the timer, speed, and temperature.
Features:
Model: WXD3-13-2W
Small size, easy to carry
Provide full protection from dust, shock, scratches and bumps, and other daily damage.
Package Includes:
1 x WXD3-13..
This is WXD3-13-2W 4.7K ohm Precision Potentiometer, widely used to adjust the timer, speed, and temperature.
Features:
Model: WXD3-13-2W
Small size, easy to carry
Provide full protection from dust, shock, scratches and bumps, and other daily damage.
Package Includes:
1 x WXD3-1..
WZ3605E 80W 5A Adjustable Buck Boost Power Supply Module is a high-definition color screen display that is clear and intuitive, using a 1.44-inch high-definition color screen LCD display, and the content is displayed on multiple screens. The output voltage is adjustable from 0.6-36.00V, and the outp..
The XBee Shield V03 Module allows wireless communication between Arduino over a modified ZigBee protocol using Xbee Module. The shield is ready to use, plug n play, without the Xbee Module. The shield can be directly put on top of Arduino Uno. It works with all Xbee Module i.e. Series 1 and Series 2..
This is a simple to use, RS232 to the serial base unit for the XBee line of products. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach an RS232 cable, attach a USB cable to power the board and you will..