Wireless 433MHz Garage Door Remote Control 4 buttons for 4 different garage doors, electronic rolling doors, or RF 433MHz retractable doors.
It is widely used in remote control switches, receiving modules, motorcycles, automobile anti-theft products, family anti-theft products, electric doors, ro..
This is WXD3-13-2W 4.7K ohm Precision Potentiometer, widely used to adjust the timer, speed, and temperature.
Features:
Model: WXD3-13-2W
Small size, easy to carry
Provide full protection from dust, shock, scratches and bumps, and other daily damage.
Package Includes:
1 x WXD3-1..
The XBee Shield V03 Module allows wireless communication between Arduino over a modified ZigBee protocol using Xbee Module. The shield is ready to use, plug n play, without the Xbee Module. The shield can be directly put on top of Arduino Uno. It works with all Xbee Module i.e. Series 1 and Series 2..
This is a simple to use, RS232 to the serial base unit for the XBee line of products. This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version. Plug the unit into the XBee Explorer, attach an RS232 cable, attach a USB cable to power the board and you will..
XBee Sensor Expansion Shield V5 with RS485 and BLUEBEE Bluetooth Interface for Arduino provides a number of interfaces that are commonly used, it includes Bluetooth, SD cards, APC communication, and RS485. Also, standard UART and 12C are also made easy to access. It is designed for easy connecting o..
XH-A232 30W + 30W TPA3110 Digital Stereo Audio Power Amplifier is a newly designed digital audio amplifier board with a dual-channel and also has a good performance. It features a high-efficiency class D audio power amplifier with the latest and original TPA3110 core technology the BTL bridge circui..
XH-A232 TPA3110 Dual Channel Digital Power Amplifier Board is a newly designed digital audio amplifier board with a dual-channel and also has a good performance. It features a high-efficiency class D audio power amplifier with the latest and original TPA3110 core technology the BTL bridge circuit is..
XH-M125 XPT8871 6W 3-5V Mono Power Amplifier Board which works in conventional class (class AB and Class D).
Features:
Model: XH-M125
Power: stereo mono 5W
Low power consumption
Package Includes:
1 x XH-M125 XPT8871 6W 3-5V Mono Power Amplifier Board...
XH-M131 DC 12V Light Control Switch Photoresistor Relay Module is mainly used for light detection and brightness detection. It is used for switching the AC / DC load on-off depending on the intensity of light. The level of brightness can be set by using the potentiometer.
Features:
Model: X..
At least two groups of output are generated by the general transformer, which has dual 12V front and dual 24V post power sources.
The tone board is powered by two 12V batteries. After the stage, the main winding including double 24V or more.
Texas NE5532 operational amplifier is used.
To..
XH-M203 Automatic Water Level Controller Switch module may switch on and off devices in accordance with the input of two sensors (the max-limit and min-limit sensors) and the use of a relay. It is perfect for applications where one has to regulate a tank's liquid level.
Features:
Model: XH-..
XH-M543 TPA3116D2 120W Digital Power Amplifier Board features a high-efficiency class D audio power amplifier with the TPA3116D2 core technology the BTL bridge circuit is more efficient than before. It has an onboard front-facing IC to improve input sensitivity and high-definition sound quality.
..