This is Mini LED Ultra Thin USB LED Lamp Camping Night Light which is a single-sided 3 LED piece. Mobile power can be used when the desktop computer lights. The high luminous efficiency, energy-saving, 5000mah mobile power, full of power can be lit for about 100 hours. The power supply is the standa..
The Mini MP1584 DC-DC 3A Adjustable Buck module is ultra-small adjustable 0.8V to 20V output DC to DC step-down Buck converter uses an MP1584EN high-frequency switching regulator and integrated high voltage power MOSFET.
It features soft start, thermal shutdown, and under-voltage lockout (UVLO) t..
The Mini NodeMcu D1 Lua WIFI Development Board Type-C is a compact yet powerful IoT (Internet of Things) development board. It features the NodeMCU firmware, enabling easy Lua scripting for rapid prototyping and development. With its Type-C interface, it offers convenient connectivity and faster dat..
This is a Mini Plug Buzzer for PC Internal BIOS Computer Board. The sound of the buzzer can be used to judge the working status of the motherboard.
Features:
Easy to Install
Wire: Red line is the positive pole, and the Black line is the negative pole.
The sound of "beep" we heard while ..
Features:
Special power module for breadboard, compatible with 5V and 3.3V.
Apply to the MB102 breadboard, very useful for Arduino breadboard projects.
DC 6.5-12V or USB power supply the input voltage.
The output voltage can be switched between 3.3V and 5V.
Two-way independent control ..
Specifically designed for the HC-SR04 Ultrasonic Sensor Module, with this Ultrasonic Sensor Mounting Case Holder you can attach the HC-SR04 module to your application such as small robots or DIY projects very quickly and conveniently.
This mounting case holder is made from good quality Acrylic. I..
MP3-TF-16P MP3 Disk TF Card Module Serial Port is a compact and inexpensive MP3 module that can be connected directly to the speaker. Module with battery power supply, speaker, the keypad can be used alone, or through the serial port control, as the Arduino UNO or any microcontroller with a serial p..
The MPR121 is a capacitive touch sensor controller driven by an I2C interface. The chip can control up to twelve individual electrodes, as well as a simulated thirteenth electrode. The MPR121 also features eight LED driving pins. When these pins are not configured as electrodes, they may be used to ..
The MPU6500 GY-6500 6DOF 6 Axis Accelerometer Gyro Sensor is now available.
Get ready to discover a whole new level of accuracy in orientation and motion tracking when using the MPU6500 GY-6500 6DOF 6 Axis Accelerometer Gyro Sensor. This small but effective sensor is the best option for applicati..
The MQ131 Gas Sensor Module is manufactured with materials that are sensitive to ozone. In the presence of the ozone gas, the sensor’s conductivity is more higher along with the gas concentration rising. Please use a simple electro circuit, Convert the change of conductivity to correspond output sig..
The MQ 135 Air Quality Detector Sensor Module For Arduino has lower conductivity in clean air. When the target combustible gas exists, the conductivity of the sensor is higher along with the gas concentration rising. Convert change of conductivity to the corresponding output signal of gas concentrat..
MQ2 Gas Sensor is useful for gas leakage detecting(in home and industry). It can detect LPG, i-butane, methane, alcohol, Hydrogen, smoke, and so on. Based on its fast response time measurements can be taken as soon as possible. Also, the sensitivity can be adjusted by the potentiometer.
MQ2 gas ..