The MPU-6050 3-Axis Accelerometer and Gyro Sensor module use MPU-6050 which is a little piece of motion processing tech!!!
The MPU6050 devices combine a 3-axis gyroscope and a 3-axis accelerometer on the same silicon together with an onboard Digital Motion Processor (DMP) capable of processing co..
This is an Optical slot speed measuring sensor for Arduino. Widely used in motor speed detection, pulse count, the position limit, etc.
The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder..
Joystick Module measures position coordination on the X and Y axis by moving the thumbstick on the top of the module. the module also has a tactile switch and it is triggered by pressing the thumbstick down.
The X and Y axes are two 10k potentiometers that control 2D movement by generating analo..
The LED RGB 5 mm Module incorporates a red, green and blue LED with a clear lens in the same 5 mm package with built-in current limiting resistors(150Ω). This is a 3 Color LED Module. Through the PWM adjusting, three primary colors can be mixed to obtain different colors.
Notice that you do..
The wheel is made up of high-quality rubber which gives maximum traction while operating. The wheel is strong and sturdy as it features a nylon-reinforced plastic rim.
Specifications:
With inner tire
Diameter: 68mm
Width: 26mm
Centre hole: 5.3 x 3.66mm (two sides is semicircle)
..
SMD RGB LED module consists of a full-color LED made by R, G, B three-pin PWM voltage input can be adjusted. Primary colors strength in order to achieve a full-color mixing effect. Control of the module with the Arduino can be achieved with Cool lighting effects. The RGB Full Color LED SMD Module co..
This HC-SR04-Ultrasonic Distance Measuring Sensor is a very popular sensor which is found in many applications where it requires to measure distance and detect the objects.
The module has two eyes like projects in the front which form the Ultrasonic transmitter and Receiver. The HC-SR04 ultrason..
The 4 Channel Wireless Four Button Remote Control Transmitter Receiver Module with Non-Locking mode can be composed of a fixed code four radio receiver circuits, remote control of four four-bit data output code corresponding to the module, you can easily make up a wireless remote control receiver ci..
This non-invasive current sensor clamped around the supply line can measure a load up to 30 Amps. It can be useful for building your own energy monitor or for building an over-current protection device for an AC load.
This current clamp can be used to detect a current of up to 30A. Simply clip i..
ACS712 20A Range Current Sensor Module consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional vo..
ACS712 30ARange Current Sensor Module consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional vol..
ACS712 5A Range Current Sensor Module consists of a precise, low-offset, linear Hall circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field in which the Hall IC converts into a proportional vol..