Castor Wheel is omnidirectional wheel. which is generally use when Robot or car need to sharp turn.
Specification:
Wheel Dia. 15 mm
Ball Dia. 13 mm
Packing Content:
1 x Caster Wheel Small
This Castor Wheel Support Chassis :
Advance Metal Chass..
This is a breakout board that mounts a 74HC4067 which is a 16-channel analog multiplexer/demultiplexer that can route both analog and digital signals in both directions.
1 of 16 input channels can be routed to 1 output or 1 input can be routed to 1 of 16 output channels. It can handle analog sig..
CDM324 Microwave Body Radar Induction Switch Sensor is a 24 GHz band single-channel radar transceiver. These Radar sensors are used for detecting, locating, tracking, and recognizing objects of various kinds at considerable distances. It operates by transmitting electromagnetic energy toward objects..
CH340E MSOP10 USB to TTL Converter Module has the power lamp PWR, and also the TXD and RXD indicators so that you can intuitively understand whether the product is working without the instrument.
Features:
High performance
Micro-USB interface data cable
With 3.3V voltage regulator chip,..
This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals and has the option to switch from 5V to 3.3V logic levels.
Features:
Chip: CH340G
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electr..
CH340G chip TTL 3.3V / 5V level switchable output (with bridge) 3.3V and 5V output voltage to supply the programmed controller With PWR, TXD, and RXD power light indicator light used to upgrade various devices.
Features :
This is a USB 2.0 to TTL UART CH340/CH340G Module Serial Converter.
..
This is CH340G USB To TTL(Serial) Converter, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The mo..
This low-cost mini USB CH341A 24 25 Series EEPROM Flash BIOS USB Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chip. It is equipped with a CH341A chip, can automatically recognize a 25 series chip, and its 24/25 series indicator lamp enables the user to easily recognize th..
The module can be used for serial expansion, I2C interface EEPROM,SPI interface FLASH, and STC MCU programming, program debugging, data acquisition, brush machine, etc. CH341A USB Converter Module equipped with CH341A chip, CH341A is a USB bus adapter chip, through the USB bus to provide asynchronou..
CH376S USB U Disk Read Write Module supports USB-Device Mode and USB-HOST Mode. It is used as a file manage control chip, used to MCU system read/write a file in USB Flash Drive or SD card.
Features:
Chip: CH376S
File operation is simple and fast.
It supports three communication interfa..
CHQ1838 IR Receiver is a miniaturized receiver for infrared remote control systems. IR Receiver can detect any signal of 38 kHz and give output at pin 3 after processing it. It includes a photodetector and preamplifier in one package and an internal filter for PCM frequency. It has very low power co..
The Pixhawk digital differential airspeed sensor does not suffer from noise brought on by lengthy cables or offsets in the ratio-metric output of the APM 2.6 analog airspeed sensor, and it also has a very low offset and a high resolution. The Pixhawk Airspeed Sensor Kit uses a Measuring Specialties ..