The ADXL335 is low power, a complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module is a 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications,..
ADXL345 is a Breakout board for the Analog Device's ADXL345 3-axis accelerometer. The module is populated with MOSFET-based Voltage level conversion circuitry to enable you to interface with different types of microcontrollers. Apart from the above all, necessary components like decoupling capacitor..
AHT10 is equipped with an ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element, and a standard on-chip temperature sensing element. This sensor gives calibrated digital signal outputs in standard I2C format.
Features:
12C Interface type
Embedded in a dua..
Developed by Ai-Thinker company, the manufacturer of the ESP32S, this Ra-01 LoRa (Long-range Radio) module will take your IoT projects the distance with communication over a long-range spread spectrum. This module uses SX1278 IC and works on a 433MHz frequency. Frequency hopping—which gives you that..
This is an Aluminum Heatsink used for cooling the chips on Raspberry Pi. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium...
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
Besides, the installation is simple, what you need to do is to remove the heatsink p..
AM2301/DHT21 Temperature & Humidity Sensor is one of the commonest from the range of DHT temperature sensors and boasts a relatively high-temperature measurement accuracy of 0.5°C in 0.1°C steps with a relative humidity accuracy of ± 3%.
It has only 3 wires, including power and ground, meaning on..
AM2302 DHT Pro Shield for D1 mini DHT11 allows for precise measurement of temperature and Humidity.
Features:
Sensor type: DHT22 temperature and humidity sensor
Signal output form: digital signal
Resolution: 16 bits.
Package Includes:
1 x AM2302 DHT Pro Shield for D1 mini DHT11...
Mini IR Pyroelectric Infrared PIR Motion Human Sensor is based on the digital intelligent infrared technology, automatic control products. High sensitivity, high reliability. Widely used in various auto-sensing electrical equipment.
Features:
Low power consumption, small size, easy to insta..
This battery is a rechargeable battery that is generally used for the DIY Project and in industries.
Application:
Emergency Lights
Solar Lighting / Led Lighting
Telecom
Electronic Weighing Scales
Package Content:
1 x battery
Note: this product dispatched after check hence i..
This power supply module is based on the AMS1117 3.3V regulator. It is capable of regulating a wide range of input voltage (4.0 to 12V) down to a fixed 3.3V output at up to 1A (Vin = 4.5V). Standard 0.1″ header pins provide a means of connecting to its input and output terminals.
These header pin..
AMS1117-3.3 LDO 800MA DC 5V to 3.3V Step-Down Power Supply Module is capable of supplying very stable 3.3V-5V DC when supplied with 4.5V-15V DC. It is capable of altering the output of the power supply before supplying it to the load so as to deliver the specified power to your load.
The products..