Brand: Import Dukan
Model: ID-01-324
Tried connecting a 3.3V device to a 5V system, or the other way around? You should know the challenge it takes. the bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and..
₹24
Brand: Import Dukan
Model: ID-01-368
This is a Black Aluminum Heatsink kit used for cooling the chips on Raspberry Pi. Compared to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
This heatsink has an adhesive film on the back. It is very easy to moun..
₹55
Brand: Import Dukan
Model: ID-01-312
Flex Cable will let you swap out the stock 500mm long flex cable from a Raspberry Pi Camera for a different size. Works great, just carefully open the connector on the Pi and slip this one in.
Features:
Easy to use.
Easily replaceable.
Applications:
Displays, PC and Computers, ..
₹55
Brand: Import Dukan
Model: ID-01-322
OV5647 Wide Angle Fish-Eye Lens Night Vision Camera for Raspberry Pi is a 5MP Night vision camera module. This is a 130° fish-eye wide-angle camera for Raspberry pi 2 Raspberry pi 3B and 3B+.
Features:
The Raspberry Pi Camera Board features a 5 megapixels
Compatible with Raspberry Pi 2, ..
₹654
Brand: Import Dukan
Model: ID-01-315
This 5mp camera module is capable of 1080p video and still images and connects directly to your Raspberry Pi. Connect the included ribbon cable to the CSI (Camera Serial Interface) port on your Raspberry Pi, boot up the latest version of Raspbian and you are good to go.
The board itself is tiny, ..
₹233
Brand: Import Dukan
Model: ID-06-603
5V 3007 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance.
The cooling fan operates on a 5V DC power supply which can be easily powered from the RPI board. It has a 2 pin JST connector to easily ..
₹85
Brand: Import Dukan
Model: ID-06-605
5V 3010 Cooling Fan is a small but powerful fan. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. This fan can be directly connected to Raspberry Pi pins 4 and 6.
The cooling fan operates on a 5V DC power supply which can be easil..
₹74
Brand: Import Dukan
Model: ID-07-420
5V 4010 Cooling Fan is a small but powerful fan. The cooling fan finds its use as an exhaust fan on the Raspberry pi case. It maintains the temperature of the extruder, which results in good heat dispersion and wonderful performance. it's also compatible with raspberry pi.
The cooling fan operate..
₹66
Brand: Import Dukan
Model: ID-01-355
The Acrylic Adjustable Camera Mount Module for Raspberry Pi is an adjustable mount setup for the Raspberry Pi camera. These are cut out of the acrylic sheet.
Raspberry Pi Camera Module Mount is a great accessory for Pi shutterbugs. The Pi camera can be attached using little screws, also the desig..
₹39
Brand: Import Dukan
Model: ID-01-365
This is an Aluminum Heatsink used for cooling the chips on Raspberry Pi. A heat sink is designed to maximize its surface area in contact with the cooling medium surrounding it, such as the air. A heat sink transfers thermal energy from a higher temperature device to a lower temperature fluid medium...
₹15
Brand: Import Dukan
Model: ID-01-357
Aluminum Heatsink kit is used for cooling the chips on Raspberry Pi. Comparing to other heatsinks, it has been attached with thermally conductive adhesive tape, allowing the Raspberry Pi to cool more efficiently.
Besides, the installation is simple, what you need to do is to remove the heatsink p..
₹15
Brand: Import Dukan
Model: ID-01-366
The Raspberry Pi prototype HAT Breadboard can provide a good prototype development platform. You can combine the function of the Raspberry Pi GPIO pin to achieve many different functions, you can build an electronic experiment environment.
Features:
Easy to Assemble.
Prototyping HAT for R..
₹168
