CH340E MSOP10 USB to TTL Converter Module has the power lamp PWR, and also the TXD and RXD indicators so that you can intuitively understand whether the product is working without the instrument.
Features:
High performance
Micro-USB interface data cable
With 3.3V voltage regulator chip,..
This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The module can be used for 3.3V logic level signals and has the option to switch from 5V to 3.3V logic levels.
Features:
Chip: CH340G
Built-in USB to TTL Transfer chip.
Designed to be used for USB to TTL electr..
This is CH340G USB To TTL(Serial) Converter, USB to TTL / USB-TTL /STC microcontroller programmer / PL2303 in nine upgrades plate with a transparent cover Compatible with ARDUINO, RASPBERRY PI, AVR, PIC, 8051, etc.
This USB–TTL converter is based on CH340G USB to Serial TTL converter chip. The mo..
This low-cost mini USB CH341A 24 25 Series EEPROM Flash BIOS USB Programmer is intended to support 24 EEPROM and 25 SPI flash 8pin/16 pin chip. It is equipped with a CH341A chip, can automatically recognize a 25 series chip, and its 24/25 series indicator lamp enables the user to easily recognize th..
CJMCU-204 USB 2.0 HUB 4-Port High-Speed Controller Module provides an additional 4 Hi-speed USB ports for your device. It can be connected directly to a computer without any external power supply and won’t need any driver installation.
Features:
USB Interface: 4
It has a built-In current ..
Details and Specifications:
This is 10pcs of each (total 30 pcs) jumper cable Dupont wire for Arduino.
High quality and in good working condition.
Durable and reusable.
Easy to install and use.
A popular choice for construction or repair.
Be used for the electronic project and Genuin..
CP2102 chip is a single-chip USB to UART bridge IC. It requires minimal external components.
CP2102 can be used to migrate legacy serial port based devices to USB.
Features:
Stable and reliable chipset CP2102.
USB specification 2.0 compliant with full-speed 12Mbps.
Standard USB ..
CP2102(6-pin) USB 2.0 to TTL UART serial converter module is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.
ThisCP2102 doesn’t require any external oscillator, it onboard-boa..
CP2102 Module is CP2102 based on highly integrated single-chip USB to TTL bridge IC. it requires the very minimum external components. The module has a built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART). It supports a ..
DB9 Female Screw Terminal to RS232 RS485 Conversion Board, this is RS232 Serial DB9 9-pin to 9 Position Screw Terminal Block. Connector DB9 adapter terminals to facilitate the commissioning equipment of the project.
Features :
Experimentation and prototype work.
All 9 pins of a DB9 connec..
DB9 Male Screw Terminal to RS232 RS485 Conversion Board, this is RS232 Serial DB9 9-pin to 9 Position Screw Terminal Block. Connector DB9 adapter terminals to facilitate the commissioning equipment of the project.
Features :
Experimentation and prototype work.
All 9 pins of a DB9 connecto..
This is DC 12V 2 Channel Serial Port RS232 Relay Module Board
Features:
Interface: DB9 Female
Easy to operate
It supports 5V or 9-12V input voltage
improved stability, with a capacitor filter circuit.
Serial instructions are single-byte instructions
2 Channel Relay ..