5 Channel Line Tracking Sensor Module (BFD-1000) is a sensor board designed for use with line follower robots. This module has been sufficient to meet the day-to-day task of tracking, but also with the infrared distance sensor and touch detection sensor, the board makes your robot design able to ada..
TCRT500 is an Infrared LED and an infrared detector. It works by transmitting a beam of Infrared light downward towards a surface which is then reflected back and read by the detector.
So this module basically acts as a simple switch when it gets close to a white/black object. You can adjust the ..
TDA1308 Stereo Driver Audio Module equipped with TDA1308 headphone driver IC with class AB Audio stereo output No click ON / OFF switch, excellent power ripple rejection and low power consumption.
Features:
Model: TDA1308
It has a high signal-to-noise ratio.
It is short-circuiting resi..
This Module is based on the TDA2030 Audio Amplifier Module which is capable of 18-watt power output with very low harmonic distortion.
Features:
It has a horn socket.
It has a 10 k adjustable resistance, can adjust the volume of the amplification.
It has an onboard power indicator light..
TDA7297 12V Dual Channel Noiseless Power amplifier module produces a power of 15W + 15W, peak up to 25W + 25W, can be accessed by two 4Ω ~ 8Ω, 10W ~ 50W speakers, a large volume of small size, high signal to noise ratio.
Features:
Can be accessed by two 4-8Ω 10-50W speakers
A large volume..
TDA7492P digital amplifier chip, designed to optimize the circuit layout, the sound quality is very good, big power. DIP switches can be adjusted directly after the amp gain more respect and better promote greater damping horn.
Package Includes:
1 x TDA7492P CSR8635 Bluetooth 4.0 Aud..
TDA8932 35W Mono Low Power Amplifier Module uses a digital amplifier TDA8932 chip. This module has high efficiency, high power, good sound quality, without additional installation of the radiator.
Features:
Small in size, high efficiency.
Circuit configuration: Mono BTL output
It has a ..
TEMT6000 Ambient light sensor acts like a transistor the greater the incoming light, the higher the analog voltage on the signal pin.
It is a silicon NPN epitaxial planar photo-transistor in a miniature transparent mold surface mounted onto a printed circuit board. The device is sensitive to the ..
The 2.4 inch TFT touch Screen LCD Module For Arduino is a large touchscreen display shield with a built-in microSD card connection.
The LCD has excellent vivid color contrast. This TFT display is big, bright, and colorful. 240×320 pixels with individual pixel control. It has way more resolution ..
TJA1050 Module is the interface between the Controller Area Network (CAN) protocol controller and the physical bus. It provides differential transmit capability to the bus and differential receive capability to the CAN controller. TJA1050 is a high-speed CAN transceiver.
Features:
It has an..
TLP281 4-Channel Optocoupler Isolation Module electrically isolates a controller from the high-power system by use of an opto-isolator IC. It is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board uses the TLP281 optoisolator and discrete ..
The TM1637 4 Bits Digital Tube LED Display Module is an affordable solution for displaying the output data of your Arduino project. This 7 segment LED Display has 4 digits which are controlled by TM1637 Driver Chip. It requires only two connections to control this TM1637 4 Bits Digital Tube LED Disp..