This is 16 Channel PWM Servo Motor Driver 12C Module.
Features :
Adjustable frequency PWM up to about 1.6 kHz
12-bit resolution for each output – for servos, that means about 4us resolution at a 60Hz update rate
Configurable push-pull or an open-drain output
The output enable pin to ..
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD1602 Parallel LCD Display is a quite good solution.
This is LCD1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White o..
A Standard Active Alarm Module for Arduino is an audio signaling device, which may be mechanical, electromechanical, or piezoelectric. This PCB Mounted Active Buzzer Module can produce a range of sound tones depending on the input frequency, i.e it can generate tones between 1.5 to 2.5 kHz by switch..
It comprises 37 Pcs of essential Arduino components. The kit includes the latest Arduino components that can be used to turn your idea into a real product. This is the most complete performance starter kit with all the essential Arduino sensors.
Features :
For beginners who are interested ..
This is a 433Mhz RF transmitter with a receiver kit for Arduino ARM MCU wireless. It can be used as a Remote control switch, electric doors, shutter doors, windows, remote control socket, remote control LED, remote control stereo, and alarm systems.
Specifications for Receiver module:
Oper..
This is a 2-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller.
Features:
Trigger mode: High level
This relay module is 5V activ..
This is a 4-Channel Relay interface board. It can be used to control various appliances and other types of equipment with a large current. It can be controlled directly with 3.3V or 5V logic signals from a microcontroller
Specifications and Features:
Trigger mode: High level
Channel:..
Rotary Encoder Rotary Encoder Module is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor/c..
This is a 5V single Channel Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM, and so on can control it. The module is triggered, high trigger current less than 5mA, part of the 51 single-chip IO port output capability is weak, pull or in..
DS18B20 Temperature Sensor Module is a Digital temperature sensor DS18B20 that will tell you temperature with 9 to 12-bit resolution! Uses only 1 wire to the Arduino or other microcontroller for communication. With the One Wire protocol, you can operate a large number of these sensors from one Ardui..
ESP-01 8266 is a WiFi module, which means it can connect to a WiFi network to send and receive data. It is also a basic part of IoT, which is lower in cost than other development boards and modules. The module is easy to use with Arduino and other controllers can run with the available libraries. Th..