CJMCU FT232H High Speed Multifunction USB to serial Port Module

A single channel USB 2.0 Hi-Speed (480Mb/s) to UART/FIFO IC is the CJMCU-FT232H. It can be set up to work with a wide range of industry-standard serial or parallel interfaces.

Features:-

• Single channel, multiple configuration USB to serial / parallel connections.
• On the chip, the entire USB protocol is handled. No programming of USB-specific firmware is necessary.
• Compatible with both USB 2.0 Full Speed (12Mbits/Second) and Hi-Speed (480Mbits/Second).
• Design of synchronous serial protocols (USB to JTAG, I2C, SPI (MASTER) or bit-bang) can be made simpler by using the Multi-Protocol Synchronous Serial Engine (MPSSE).
• Up to 12Mbaud in UART data transfer rate. (An external level shifter limits the RS232 Data Rate).
• Up to 8 Mbyte/Sec of data can be transferred using the USB to asynchronous 245 FIFO mode.
• transfers up to 40 Mbytes/Sec in synchronous 245 parallel FIFO mode from UB
• supports a proprietary, bi-directional, width-configurable FT1248 half-duplex interface (1, 2, 4 or 8 bits wide).
• Virtual Com Port (VCP) and Direct (D2XX) drivers from FTDI, which are both free of charge, typically eliminate the need for USB driver development.
• receive buffer timeout that is adjustable.
• CPU interfaces is made simpler by FIFO interface mode in the CPU.
• Option for a quick serial interface.

Package Include:- 

1 X CJMCU FT232H USB to serial Port Module