1.8-inch SPI Non-Touch TFT Interface Screen Module

The TFT LCD module has always been one of the hot products in DIY industry and LCD is basically the necessary products during all projects, at the same time, serial port modules are also the popular ones because it takes few IO and the usage is simple. the 1.8-inch SPI Non-Touch Screen Module is wrapped up into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use them with any microcontroller.

The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you’ll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display. SPI mode requires only 5 pins total but is slower than the 8-bit mode. In addition, 4 pins are required for the Non-Touchscreen.

Features :

• Need at least 4 IOs from your MCU

• It shows the color depth of 262K/65K.

• Big display with good resolution.

• The display has a wide viewing angle.

Package included:
1 X 1.8-inch SPI Non-Touch TFT Interface Screen Module